Fire retardant JH - TFR100Fire retardant JH - TFR100

Author：admin   Date：2018-01-09

"Jane interface"
Jh-tfr100 odorless, non-toxic, non-corrosive crystalline powder solid, processed fiber,
It has flame resistance, constant strength and softness, and can be used with resin.
[scope of application]
Paper. Cotton.T/C blend (polyester/cotton) T/R blend (polyester/viscose). Nylon polyester.
ACETATE (ACETATE), and other fabrics. Such as curtain cloth, cloth rug, table cloth, fiber products, etc.
[processing mode]
The fabric can be treated by impregnating or spray.
Recommended dilution: T/C add 10-20% water: T/ r. nylon. Polyester, add 30-50% water; Cotton and paper
Add 80-95 water)
[dry time]
After processing fabric, in the air for 2-3 hours, naturally dry, not all back sticky.
Vacuum Fried, do not affect the original nature, if need to forced drying, temperature not over 130 ℃ the habitat for a long time, otherwise
May produce change color or fade. Such as adding resin, the temperature can reach 190 ℃. 3 minutes don't change color or fade
[spray area]
Depending on the fabric, the adsorption capacity is 150 to 250 grams per square meter, and the fiber material is different.
The adsorption capacity is not the same, the test should be done first.
[product composition]
Phosphoric acid (C2H20) PO/ boron (boric acid, boron yarn) and other fireproofing agents.
Osmotic PH :6-7.
Specific gravity: 1.15 + / - 0.05

P/class fire protection P:1.5%.
N: 2.0%
[solid composition] 100%.
Use 3 ~ 10%